Meteor MLS provides high performance extract ventilation for most kinds of industrial and commercial buildings. Tested to and in compliance with EN 12101-2.
Wide range of applications - Meteor MLS is classed as a dual purpose ventilator, providing both day to day and smoke control ventilation. A polycarbonate version allows the entry of natural daylight, and an aluminium infill panel is available, with the option of additional acoustic attenuation. Pneumatic or electric linear drives are available.
High performance - Meteor MLS has high aerodynamic, acoustic and thermal performance, and has a high resistance to the effects of fire.
Acoustic performance – Meteor MLS offers the option of a reduced noise panel with a performance of up to 33 dB R’w.
Thermal performance – As an option, the base of Meteor MLS can be thermally broken to reduce air leakage and increase insulation.
Proven performance - Meteor MLS has been exhaustively tested and certified to EN 12101-2: 2003 in accredited third party test laboratories and is CE marked.
Easy to install - Meteor MLS may be installed into glazing, onto a curb or into sheeting. It has a wide range of base profiles to suit most glazing, sheeting or curb types.
Durable - Meteor MLS is manufactured from tough, corrosion resistant aluminium with stainless steel fixings.
Quality of manufacture - Meteor MLS is manufactured under the ISO 9000 quality standard.
We provide a pre-order design service. We also offer complete project management, installation, wiring and commissioning, which means that we take complete responsibility to ensure that the product is in full working order within one package of works.
Please contact us for more information relating to the application, specification, installation or servicing of this product.
Natural twin flap roof ventilator, suitable for natural day to day ventilation and smoke control, for high aerodynamic, acoustic and thermal performance. Tested to and in compliance with EN 12101-2.
From 1000mm to 2500mm in width in 1mm increments
From 1000mm to 2500mm in length in 1mm increments.
All components of the base and flap are manufactured from EN AW 6060-T66 aluminium alloy. Bases can be:
Insulated double skin incorporating a thermal break
Installation angle from 0 to 30° from the horizontal.
For pneumatic versions, either double-action locking mechanisms or failsafe open. For electric versions, only double-action locking option available.
If it is used as a smoke ventilator, activation is either by local thermal fuse which opens the unit at a pre-selected temperature, or by responding to an external release signal.
Performance of Meteor varies with the size and options selected. Most tests have been conducted in accordance with EN 12101-2. The exact performance attribute will depend on the chosen size, controls, and flap type.
Reliability class | RE 1000 (1,000 plus 10,000 cycles for use as a day to day ventilator) |
Wind load class | WL 1500 |
Snow load class | Up to SL 5000 |
Resistance to heat | B 300 |
Low ambient temperature operation | T(00) to T(-15) |
Materials resistance to fire | E (to EN 13501-1) |
U value | From 1.07 to 2.9 W/m²K |
Sound insulation | Up to 33 dB R’w |
Tested to and in compliance with EN 12101-2 and CE marked.